Skip to main content

What Makes Water Jet Cutting Unique?

Blasting is a convenient method of prepping the surface. Many kinds of abrasives such as sand, grit, steel etc. are used for the process. But using water for this purpose has been a revolutionary change. Water jet cutting in Dubai is being used meticulously for all kind of blasting purposes.
Following are two types of water jet cutting in Dubai
Pure water jet cutting- Water without any contaminants is used in this process. It is the extreme force of the machine that makes the impurities to shred away and creates a clear base.
Abrasive water jet cutting- Abrasives are introduced along with water in a high-pressure system for the hard surfaces to create a clearer spectrum. Mostly the abrasive used is garnet.


While choosing the abrasives, be sure to select only the best from leading steel grit
suppliers, UAE. Since if the cleansing is done correctly, other works such as painting
and coating too can be conducted seamlessly.
Whichever technique one chooses, water jet cutting in Sandblasting companies Dubai
is a unique process due to multiple reasons. Here are a few-

No hazard, no waste

It’s plain water used in the process that creates no hazard to the environment. The remnants
of water jet cutting in Dubai do not harm our surrounding like any other abrasive.
Also, modern equipment is created in a way that very little water is used in the process.
It is the high pressure created by the machine that cuts through dirt and grime.

Can cut almost anything

Painting and coating companies in Dubai emphasize on a clean surface without a trace
of residue. Not all abrasives are equipped with the kind of strength to work seamlessly on
any surface. But it is only water jet cutting that can pierce into any area and eradicate all
intruders.
You can always trust water jet cutting in Dubai for a problematic surface where no abrasives
could work. Bullet-proof glass, stone, metal or materials with the reflective or uneven
surface also come under the category. Also, since it is water, it will remain gentle and no
scrap the actual material.

Less heat produced

Excessive heat produced during a blasting session can create minor damages in and
around the targeted space. Water jet cutting produces less heat as compared to its
counterparts. It is an ideal choice when cutting plastic as heat will make it curl. Many
other materials that may be damaged due to excess heat can be easily cut with water
jet cutting.

Accuracy to the point

Water jet cutting in Dubai is capable of achieving 0.13 mm accuracy. This is not the case
with other abrasives where a comparatively big space is targeted due to the size of
the abrasives. But when it comes to involving water in the process, highly accurate and
intricate 3D cuts are created to help achieve the aspired goal.

Finally low cost

First of all, water can be acquired easily at a meagre price if any. Also, the cost of running
a water jet cutting equipment is way lower than any other medium. All the items in this
machine are comparatively cheaper as a gentle eco-friendly product goes into it, and it doesn’t
create any friction within the parts.
Water jet cutting in Dubai has more obvious advantages, and it the reason why it is leading
the abrasive world. Contact us, the leading steel grit suppliers, UAE for water jet cutting
equipment and get away with the grime. We are also the best painting and coating companies
in Dubai, so connect with us
.
Labels:

Comments

Post a Comment

Popular posts from this blog

Why Dubai Prefers Garnet Abrasive Blasting

Dubai is rapidly becoming a gigantic international hub for construction, oil, and gas sectors. With these sectors growing, the demand for better surface preparation methods has increased by hundreds of times. Garnet abrasive blasting has become the first choice of Dubai industries because it is effective, cost-friendly, and eco-friendly. In this blog, here we are going to discover why companies outsource garnet abrasive blasting for their surface treatment requirements. What is Garnet Abrasive Blasting? Garnet abrasive blasting is a very aggressive surface preparation process applied prior to coating, painting, or other processing. The operation makes use of crushed garnet abrasive and is very clean with an extremely fine cut without harming the material below. Garnet is finer cut compared to normal abrasives, less dusty, and less surface contaminating. Garnet is a low-processing mineral and hence has less impact on the environment. The angular grains of garnet have more cutting actio...
Post a Comment
Read more

Protection And Comfort You Deserve - Industrial Safety Equipment Suppliers in UAE

Safety at the workplace is an important factor to be considered for every worker in the industrial sector. Providing them with the right equipment according to various industries can protect their health. Every employer must provide safety products like gloves, safety helmets, glasses/goggles, and safety boots, hearing protectors, respirators and high-visibility clothing like reflector jackets at a workplace for the protection of their employees. In industries such as construction, welding, burning, chemical or petroleum different sets of tools and equipment are required. Risks involved at workplace Industrial sector evolve around many risk factors at workplaces however hard it is tried to eliminate. These hazards could include damage to the head, feet or any other part of the body from different objects. Some of the risks involved that could cause a severe damage to a worker’s health condition are: Frequent lifting of heavy objects Poor lighting conditions Dust and ...
1 comment
Read more

How to Select the Right Sandblasting Machine for Your Project

  Choosing the right sandblasting machine is essential for achieving precise, efficient, and safe surface preparation in any industrial or commercial project. Whether you are restoring metal structures, cleaning equipment, or preparing surfaces for protective coatings, selecting the correct equipment ensures superior results and smooth workflow. With the UAE’s growing industrial sector, businesses increasingly rely on high-quality blasting solutions to maintain performance and durability. Understand Your Project Requirements The first step is to evaluate the type of surface you are working on and the overall scale of the job. The choice of machine, abrasive media, and pressure settings depends on whether you are removing rust, stripping paint, or handling delicate materials. For contractors who work across multiple job sites, Portable Blasting Machines in UAE are a practical solution. They are easy to transport, deliver consistent performance, and support a wide range of industria...
Post a Comment
Read more